Blog Details

Nickel vs Platinum RTDs — How to Read It in Project Specs

September 29, 2025

When a project spec calls for a 1k RTD sensor, how do you know if it’s Nickel (Ni1000) or Platinum (Pt1000)?

 

Here are 4 quick checkpoints:
1. Resistance & Reference Temp
Pt100 / Pt1000 → Platinum
Ni1000 / Ni500 → Nickel

2. Standards Referenced
IEC 60751 → Platinum RTD
DIN 43760 → Nickel RTD

3. Tolerance & Accuracy Wording
Class A / B (IEC) → Platinum
±0.5°C or % values → Nickel

4. Region & Vendor Practices
North America → Platinum is standard
Europe (older specs) → Nickel is still common
Siemens Europe → Ni1000 often used
Johnson, Honeywell, Distech → Pt1000

Rule of Thumb: If the spec only says “1000 Ω RTD” → always check for Ni vs Pt keywords or the standard reference.

Getting this right avoids compatibility issues between controllers and sensors!

Which do you see more often in your projects — Ni1000 or Pt1000?

 

 

Latest Posts
Are You Losing Projects Because of Your BMS Process?

October 16, 2025

Why Outdated Workflows Are Killing BMS Efficiency in 2025

October 15, 2025

Is Your BMS Still Stuck in the Pre-Digital Era?

October 16, 2025

What Is Kp in Control Valves — and Why It’s the Hidden Hero of Stability?

October 13, 2025

Why Most BMS Consultants Are Stuck in 2010 (And Don’t Even Know It)?

October 10, 2025

Understanding Fp (Pressure Drop Factor) in Valve Selection

October 6, 2025

Nickel vs Platinum RTDs — How to Read It in Project Specs

September 29, 2025

Belt Monitoring in HVAC Fans: Current Switch vs VFD Feedback

September 26, 2025

Why Totalization is Critical in BAS (and the 168-Hour Cycle Rule)

September 23, 2025

Current Sensing Relay (CSR) in HVAC & BMS – Can It Detect Belt Breaks or Shaft Jams

September 11, 2025

Screwed (Threaded) Control Valves in HVAC/BMS

September 3, 2025

Why External Static Pressure (ESP) Always Considers Dirty Filters

September 2, 2025

Dual Temperature Water System – Practical Benefits

September 1, 2025

EPO Interlocks in BMS – Why They Matter

September 1, 2025

Why Generator & Damper Interlock Matters in Critical Facilities

September 1, 2025

Room Pressure Monitoring in Hospitals – More Than a Device, It’s a Compliance & Safety Necessity

September 1, 2025

Spring Return vs. Non-Spring Return Actuators – What Do Specs Really Call For?

September 1, 2025

Ever heard of a Piezo Ring AFMS in a supply blower

September 1, 2025

Are Differential Pressure Transducers and Velocity Sensors the Same?

September 1, 2025

Protect Your HVAC Units with Smart Leak Detection

September 1, 2025

Circulation Pump vs Freeze Protection vs Low Ambient Protection — What’s the Difference in HVAC/BMS

September 1, 2025

Understanding Alarm Classifications in BMS – Why It Matters

September 1, 2025

BAS Programming Tip: Don’t Forget Water Flush Mode

September 1, 2025

What is Mount Recessed?

September 1, 2025

What does “Mechanical Cooling” really mean in Building Automation

September 1, 2025

Understanding Access Levels in Building Management Systems (BMS)

September 1, 2025

HVAC Insight: Are Your Fresh Air Systems Smarter Yet

September 1, 2025

Upstream vs Downstream – What’s the Difference in HVAC

September 1, 2025

Steam Valve Fail Position – NC or NO? Let’s Clear the Confusion!

September 1, 2025

Why Pre-Purge & Post-Purge Sequences Matter in HVAC Control

September 1, 2025

ECM vs. VFD: Who Gets the 0-10V Signal?

September 1, 2025

Smart Buildings & Sustainability: How BMS Drives LEED & Green Certifications

September 1, 2025

Why Supply Voltage & Nominal Voltage Matter in HVAC Controls & BAS

September 1, 2025

Voltage Clarity: Nominal vs. Supply – Know the Difference!

September 1, 2025

FPS System Design: Engineering Best Practices for Reliability & Efficiency

September 1, 2025

Prevent Costly HVAC Failures with a Simple Dry Switch Monitor!

September 1, 2025

Don't Wait for a Fire Emergency! Here’s How FPS Engineering Saves Lives!

September 1, 2025

HVAC Controls vs. BMS: What’s the Difference?

September 1, 2025

Smart Buildings, Smarter Future: Why BMS is the of Modern Infrastructure!

September 1, 2025

Breathe Easy: How ASHRAE Standards Ensure Healthy CO₂ Levels Indoors

September 1, 2025

Boosting HVAC Efficiency: ASHRAE 90.1’s 15°F ΔT Requirement for Chilled-Water Coils

September 1, 2025

Why Every IDF Room Needs Proper Ventilation, Alarms & Clear Signage

September 1, 2025

Never Miss this Information in your Control Submittal

September 20, 2024

Greatest Time of All Control Contractor in Graphics Generation

September 13, 2024

"Does Smart Building Automation Truly Enhance Energy Efficiency?"

September 5, 2024

Why 3D floor plan important in Building Automation

August 31, 2024

11 Things Important in HVAC Control Submitta

August 28, 2024

10 - Important Process HVAC Control Or Mechanical Contractor Can't Avoid In BMS Automation

August 26, 2024

9- Steps Important In BAS Pre-Sales Engineering For HVAC Mechanical Or Control Contractor

August 25, 2024

Never Do This Mistake If You Are HVAC Mechanical Or Control Contractor

August 24, 2024

7-Steps Important In Damper Actuator Torque Calculation

May 14, 2024

Never Miss Following things In Valve Schedule

May 14, 2024

Menu